Table of Contents


Ross Bicycles

The company was founded in 1940 by Albert Ross as Ross Galvanizing Works, located in Brooklyn, NY. It started making bicycle in 1946 and by the 1950s it was the third largest producer of bicyles after Schwinn and Huffy. In the 1970s it moved to Allentown, PA and produced over 1 million bicycles per year. http://mombatbicycles.com/MOMBAT/BikeHistoryPages/Ross.html 1)

Ross had models that directly competed with the Schwinn Sidewinder called the Ross Diamond Cruiser. Ross introduced their first production MTB, the Force 1, during the first Interbike Show in October 1982 the bikes name was later changed to the Mt. Hood due to a trademark conflict. In early 1982 Ross Signature (hand made bike department) was making custom Mountain bikes. Jim Redcay was the builder (Tom Kellogg was working on Road Bikes). http://mombatbicycles.com/MOMBAT/BikeHistoryPages/Ross.html

Even Buddy Can Ride a Ross
Even Buddy Can Ride a Ross Ross Bikes



1982 Diamond Cruiser

Easy to make fun of, but compared well against Schwinn's Sidewinder. The 10 speed Diamond Cruiser is listed for $169.95 in the 1982 price list

Charlie Kelly rode … this Ross at the 2018 Crested Butte-Aspen Klunker Tour. He deemed the bike to be unsuitable for use for anything beyond a landfill. He told me it was possibly the worst bike he’d ever ridden. Uncle Crusty's review of a 1982 Diamond Cruiser


Its main problem was weight. Its steel rims and tires weighed 12 pounds, the frame was 10 1/2 pounds, and 6 pounds for the components. The finished bike weighed well over 40 pounds (perhaps 48?) 2)

1982 Diamond Cruiser
1982 Diamond Cruiser Uncle Crusty


1982 Force 1

The first Ross mt. bike came right after the Diamond Cruiser. 32 pounds. Debuted in October 1982. 3)

Raced by the first sponsored mt. bike team: The Ross Indians.

The bike pictured is probably a 1983.

1983 Force 1
1983 Force 1 mombat


1983 Redcay Mountain

Ross started a signature series of handmade frames made by Jim Redcay. Upgraded components from the Force 1 and weighed 31 pounds. By the late 80's, 40% of Ross' sales were mt. bikes, and thus possibly >200,000 mt. bikes. 4)

1983 Redcay Mountain
1983 Redcay Mountain mombat


1984 Curb Crusher

Low end semi-mtb-cruiser. 5 speeds. SunTour Honor RD-1100 (1984-86), bullmoose bars 5), one-piece cranks, side pull brakes. $159 price on July 1984 receipt.

1984 Curb Crusher
1984 Curb Crusher ebay


1984 Mt. Hood

In 1984 Ross chromed all of their mt. bikes, as chrome is strong, stainless (for a few years,) and shiny.

Not sure why a Brooklyn, NY company would name their bike after a mountain in Oregon - as it would be 36 years until Mt. Hood would allow bicycles on its year round ski lifts: Timberline Bike Park. Likely they were copyright shy after a Force-1 trademark issue. Ross also produced a Mt. Whitney at this time with better components and a pound lighter.

The picture at the right is likely a 1983.

1983 Mt. Hood
1983 Mt. Hood vanguard designs


1985 Mt. Washington

Ross stretched their brand down range a bit, just before discovering that Asia had the low-end business model locked up. The Mt. Washington was 35.4 pounds, with 1 piece cranks, and “heavy duty” steel rims. Ross moved production to Taiwan in 1986 and then declared bankruptcy in 1988. 6) If it wasn't for the later down-market shift, and lack of focus on producing only quality bikes, Ross would probably be very well regarded today.

1985 also saw the introduction of a Mt. Rainier, Mt. St. Helens and a Mt. Whitney.

1985 Mt. Washington
1985 Mt. Washington ebay


1986 Mt. Whitney

“Fake” fillet brazing applied on top of TIG welding. Full SunTour XC, complete with roller cams.

1986 Mt. Whitney
1986 Mt. Whitney mombat


1987 Bear Mt.

SunTour Alpha 3000 - a derailleur that only works with a single shifter, made only in 1987.

1987 Bear Mt.
1987 Bear Mt. ebay


1988 Mt. Hood

Shimano Light Action SGS (1987-1992+).

Sporting a “special” stem.

1988 Mt. Hood
1988 Mt. Hood bikeforums


1989 Mt. Olympus

1989 Mt. Olympus
1989 Mt. Olympus referencebicycle


1991 Mt. Katahdin

Full Shimano 70GS (1990-1992), a budget groupset.

1991 Mt. Katahdin
1991 Mt. Katahdin ebay


Production Notes

[1]. Ross made many, many tons of mt bikes:

Thus, via guesswork:


2)
Restoration notes from: bikeforums
5)
The bullmoose bars were installed with a cantilever brake cable hanger, which is not used by the ineffective side-pull brakes. Most other Ross MTBs use cantilevers.
6)
Three resurrections since then have failed wikipedia, and https://rossbikes.com/. The latest seems to be working: https://warbikes.com/